Types of Door Locks for Patio Doors in Aylesbury
A sliding patio door in aylesbury is a great way to add more light into your home. They are also easy to maintain and safe from intruders.
A customer contacted us to discuss the possibility of installing a brand new lock on their front door. After a variety of options were analyzed, they chose to have a Yale night latch fitted as well as a set of new keys provided.
Sash Locks
Sash locks, which are among the most popular types of mortice locks, work with a combination latch and deadbolts. These locks are installed within the door's material and operate with keys to unlock or lock them. They are an excellent choice for back doors and front doors, as they are extremely secure. Sash locks come in a variety of sizes that can be adjusted to all door thicknesses. They can also be installed on UPVC and hardwood doors.
There are a variety of different kinds of sash locks available however the most well-known are the five lever sash lock as well as the three lever sash lock. The mortice sash lock that has five levers is among the most secure options and is in compliance with British Standards for thief-resistant locks. It also comes with face plates and strikers which can be customized to match your door knobs or handles. The three-lever lock is less secure, but it provides adequate security for domestic use. It is also easy to modify, since it has fewer levers and can be utilized on all doors within the home.
The the rim-profile sashlock is another type of sashlock. They are like sash locks but differ in that they are not fitted to the door. They attach to the surface and can be secured from both sides. They are suitable for indoor doors that require privacy like bathrooms and bedrooms.
A window lock that is sash-based is an excellent way to protect your home from intruders and keep your children safe. These locks prevent the sash from opening too much and ensure that your children don't fall out of the windows. They are available in a range of sizes, ranging from 3 inches to 5 inches, and are a great addition to any window restoration project.
Sash window locks are easy to install, and can be done at home by anyone who is a D.I.Y enthusiast. To begin, you will need to use an ruler and pencil to mark the center point at which you want to place the lock. Once you've marked your central point, you'll need to remove the screws that were holding the sash. After removing the screws you must clean any debris or paint that might remain. After that, you can install the new fastener.
Mortice Locks
A mortise lock is a large mechanism that is able to fit into the interior of the door. They are typically found in older buildings as well as modern upmarket residential construction. You can still buy mortise-style locks in hardware stores. It is a very sturdy and secure option. It's ideal for securing high-traffic areas such as hospitals or schools.
It is not possible to use a mortise locking mechanism with a standard knob handle as the bolt will only retract when a key is used. It is also important to select knobs and handles that are perfectly sized to fit into the lock case. The bolt won't be able to move unless you turn the knobs. Refer to the lock diagram for any questions.
Mortice locks are typically constructed from strong materials that are able to withstand wear and tear. Their weight and size make them extremely difficult to break into even under extreme pressure. They are a great option for areas with high traffic such as hospitals and schools, where they will be frequently abused.
Like rim locks, mortise deadlocks can be found in different styles and security levels. There are three-lever mortice locks which are typically used for doors inside, like bedrooms or in-between porches. But, they're not considered to be as secure as a five-lever mortice lock due to the fact that they have fewer levers and therefore present a greater risk for key duplicates.
It is essential to verify the British Standard approval of any mortice lock you buy for an exterior door. This will ensure that your door is secure enough to prevent burglars from entering your home or taking your valuables.
A mortise lock works by locking the form of a pocket cut into the frame of the door. This pocket is known as"mortise" and the lock itself is held in place by an 'lock case' attached to the door frame by nails or screws. A hard collar is usually placed on the exterior of the cylinder so that it cannot be removed using the pipe wrench.
Cylinder Locks
Cylinder locks are a good choice on uPVC wood, composite or timber doors. These locks consist of two parts - the lock, which is activated by the door latch or dead bolt and the cylinder that controls it. The design allows both parts to be replaced separately in the event of need. This is a great option if one of the parts isn't working properly or if you would like to upgrade to a more security cylinder.
The lock cylinder contains series of pin pairs inside it. It is the part of the lock that receives the keys. When the correct key is put into the lock cylinder, the notches on it push the pins up to different levels. This allows them to rotate and open the doors. If you use a wrong key, the notches won't align and most of the pins will remain in their normal position.
There are a variety of cylinder locks available, from basic pin tumblers to high-security versions that can resist multiple lock picking techniques. The more pins that are in a locking cylinder, the more difficult it will be to pick them. Standard cylinder locks usually have six pins. The more secure versions may have as many as thirteen pins. These pins are also called "security pins". Security pins are available in a variety of types, including spools that have narrow waists machined, which is similar to the cotton spool. They may also be serrated pins that have one or more narrow grooves.
A cylinder lock is easier to install than mortise locks because it does not require the frame of your door to be drill. It's a good thing to have the frame of your door measured and fitted by a professional to ensure that it is positioned correctly. If your door isn't square, you'll have to choose an offset cylinder.
Cylinder locks are less expensive than smart locks and offer a good level of security. They are an excellent option for homes that have less security or for those who want to lock their home quickly. They are especially efficient if the door has a hole already drilled for the lock.
Mullion Locks
A mullion is a middle section that divides the double doorway, making it possible for one side of the doorway to be used as a single door. It can be fixed, or removable. Mullions are available in wood, metal or plastic. They can be used with mortise and rim lock exit devices. They increase the security of double doors and allow for greater access than rods with vertical exits. They are also great for hurricane, high-use and fire-rated doors.
During construction, a mullion is likely to be joined to the head of the frame and then secured to the ground. Some mullions can be removed. This makes them an ideal option for commercial projects, where doors' locations may change frequently. If a business owner wants to construct an entrance to the back for employees, they can remove the mullion and allow larger furniture to move through.
Conventional mullions require removal of screws or bolts from fittings that are inserted into the floor and on top of the door frame. This is a lengthy and time-consuming procedure that typically requires two people. In time, repeated removals could cause the fittings and mullions to loosen. Furthermore, if the mullion is not in place, carts, gurneys and large machines aren't able traverse the doorway.
windows and door fitters near me keyed door mullion that can be removed has been developed to solve this problem. It permits the removal of a mullion easily and quickly from the top bracket with the rim cylinder. This is a great option when a large, unobstructed opening in the door is required. The PDQ 9300 Series removable mullions are specifically designed to work with the 6300/6400 Series Rim Exit Devices that are mounted on pairs of doors. They also allow the top bracket of the mullion to be lifted away from upwardly extending protrusions 42 and 43 on the bottom fitting 20 which is permanently attached to the floor 14. The latch is then released and the mullion is temporarily removed. When the mullion is put back in place the latch is automatically engaged by the rim-cylinder and the locking mechanism is activated.